Sikaplan® WT 1200-30 C
Sikaplan® WT 1200-30 C is a polyolefin (FPO-PE), mechanically fixed, heat weldable, flexible sheet waterproofing membrane with a glass fibre reinforcing inlay. Thickness 3,0 mm.
- Resistant against ageing
- Contains no solvents, heavy metals, halogens, and plasticisers
- Recyclable
- Resistant against root penetrations and microorganisms
- Optimised flexibility, tensile strength and multi-axial elongation
- Flexible in cold temperatures
- Dimensional stable
- Resistant against permanent water temperatures of
max. +40°C - Suitable for contact with acidic soft water and
alkaline environment - Optimised workability, thermal weldable
- Can be installed on damp and wet substrates
- Temporary UV stable for installation (350 MJ/m2 acc. EN 12224)
- Bitumen resistant
Usage
Sikaplan® WT 1200-30 C may only be used by experienced professionals.- Waterproofing of basements and cut-and-cover structures against groundwater
Advantages
- Resistant against ageing
- Contains no solvents, heavy metals, halogens, and plasticisers
- Recyclable
- Resistant against root penetrations and microorganisms
- Optimised flexibility, tensile strength and multi-axial elongation
- Flexible in cold temperatures
- Dimensional stable
- Resistant against permanent water temperatures of
max. +40°C - Suitable for contact with acidic soft water and
alkaline environment - Optimised workability, thermal weldable
- Can be installed on damp and wet substrates
- Temporary UV stable for installation (350 MJ/m2 acc. EN 12224)
- Bitumen resistant
Packaging
Roll size | 2,00m (width) x 10,00m (length) Or roll length individual as specified by agreement |
Colour
Surface | smooth |
Colour | top layer: green bottom layer: black |
Product Details
APPROVALS / STANDARDS
- CE Marking and Declaration of Performance to EN 13491 - Geosynthetic barriers - For use as a fluid barrier in the construction of tunnels and associated underground structures.
- CE Marking and Declaration of Performance to EN 13967 - Flexible sheets for waterproofing - Damp proofing and basement tanking.
Product Declaration
EN 13967 - Flexible sheets for waterproofing. EN 13491 - Geosynthetic barriers for tunnels and associated underground structures
Shelf Life
5 years from date of production
Storage Conditions
Product must be stored in original unopened and undamaged sealed packaging in dry conditions and temperatures between + 5 °C and + 35 °C. Store in a horizontal position. Do not stack pallets of the rolls on top of each other, or under pallets of any other materials during transport or storage. Always refer to packaging.
Visible Defects
Pass | (EN 1850-2) |
Effective Thickness
3.00 (- 5/+ 10%) mm | (EN 1849-2) |
Straightness
≤ 50 mm/ 10 m | (EN 1848-2) |
Mass per Unit Area
3.06 (- 5/+ 10%) kg/m2 | (EN 1849-2) |
System Structure
Ancillary Products:
- Sikaplan® WT Disc
- Sikaplan® WT Fixation Plate PE
- Sikaplan® W Felt PP
- Sikaplan® W Tundrain
- Sikaplan® WT Protection Sheets
- Sika® Waterbar WT for waterproofing of concrete joints and compartments
- Sikaplan® WT Tape 200, bonded with Sikadur -31
- Sarnafil® T Clean, cleaner for soiled membrane surfaces
- Sarnafil® T Prep for seam preparation, prior to heat welding
Tensile Strength
≥ 10 N/mm2 (machine direction) | (EN12311-2) |
≥ 8,5 N/mm2 (cross direction) | |
10 N/mm2 ± 2.0 (machine direction) | (ISO 527) |
9 N/mm2 ± 2.0 (cross direction) |
Elongation
≥ 450% (machine/ cross direction) | (EN12311-2)(ISO 527) |
Burst Strength
≥ 50% (D= 1,0 m) | (EN 14151) |
Resistance to Static Puncture
3,2 kN (± 0.40) | (EN ISO 12236) |
Resistance to Impact
Watertight at 1250 mm drop height (500 g falling weight) | (EN 12691) |
Resistance to Static Load
≥ 20 kg (Method B, 24h/ 20 kg) | (EN 12730) |
Water Tightness
Pass (Method B, 24h/ 60 kPa) | (EN 1928) |
Foldability at Low Temperature
No cracks at - 50°C | (EN 495-5) |
Tear Strength
≥ 65 kN/m (Method B, V= 50 mm/min) | (ISO 34) |
Resistance to tear (nail shank)
≥ 850 N | (EN 12310-1) |
Joint Shear Resistance
≥ 900 N/ 50 mm | (EN 12317-2) |
Coefficient of Thermal Expansion
190 x 10-6(± 50 x 10-6) 1/K | (ASTM D 696-91) |
Resistance to Oxidation
(90d/ 85°C) | (EN 14575) |
Change of tensile strength: ≤ 25% | |
Change in elongation: ≤ 25% |
Chemical Resistance
A (hydrolysis under acid conditions): | (EN 14414) |
Change in elongation: ≤ 10% | |
B (hydrolysis under alkaline conditions): | |
Change in elongation: ≤ 10% | |
D (synthetic leachate water): | |
Change in elongation: ≤ 10% |
Durability of Water Thightness against Ageing
(12 weeks) | (EN 1296)(EN 1928) |
Pass (Method B, 24h/ 60 kPa) |
Durability of Water Tightness against Chemicals
(28d/+ 23°C) | (EN 1847)(EN 1928) |
Pass (Method B, 24h/ 60 kPa) |
Microbiological Resistance
Change of tensile strength: ≤ 15% | (EN 12225) |
Change in elongation: ≤ 15% |
Accelerated Ageing in Alkaline Environment Tensile Strength
Pass (Appendix C, 24 weeks/+ 90°C) | (EN 12311-2) |
Resistance to Environmental Stress Cracking
≥ 200h | (EN 14576)(ASTM D 5397-99) |
Resistance to Weathering
Remaining tensile strength and elongation: | (EN 12224) |
≥ 75% (350 MJ/m2) |
Resistance to Root Penetration
Pass | (CEN/TS 14416) |
Reaction to Fire
Class E | (EN ISO 11925-2)(EN 13501-1) |
Exposure to Bitumen
Pass (Method A, 28d/+ 70°C) | (EN 1548)(EN 1928) |
Service Temperature
- 10°C min./+ 40°C max.
Ambient Maximum Temperature of Liquids
+ 40°C
Application
Ambient Air Temperature
+ 5°C min./+ 45°C max. For installation below + 5° ambient temperature, special measures are required in accordance with relevant national regulations and Sika guidelines.
SUBSTRATE QUALITY
In-situ concrete: Clean, sound and dry, homogeneous, free from oils and grease, dust and loose or friable particles.
Shotcrete: The profile of the shotcrete surface must not exceed a ratio of length to depth of 10:1 and its min. radius must be 20 cm. The shotcrete surface must not contain broken aggregates. Any leaks must be sealed with Sika® waterproof plugging mortar, or drained with Sika® FlexoDrain. Where necessary to achieve the desired profile/surface, apply a fine sprayed concrete layer on the shotcrete surface with a min. thickness of 3-5 cm and aggregate diameter not exceeding 8 mm. Steel (girders, reinforcement mesh, anchors, etc.) must also be covered with a minimum of 4 cm fine sprayed concrete. The shotcrete surface must be cleaned (no loose stones, nails, wires, etc.).
A polypropylene geotextile (≥ 500 g/m2) or a compatible drainage layer must be installed prior to the membrane application.