Product Data Sheet Show all documents

Sika® Igasol® Emulsion BA-10

RUBBERIZED BITUMINOUS WATERPROOFING EMULSION

Sika® Igasol® Emulsion BA-10 is a rubberized bituminous liquid emulsion with excellent adhesion, which dries to a tough, seamless, flexible, waterproof and vapour-proof membrane for concrete structures.
Suitable for tropical and hot climatic conditions.

Sika® Igasol® Emulsion BA-10 provides:
  • High rubber content - 10 %
  • Excellent adhesion to most building substrates
  • Reduced chloride penetration
  • Can be applied on damp substrates
  • Non sagging
  • Single component
  • Water based
  • Economical, easy to apply, reduces labour cost
  • Can be applied on vertical and horizontal areas
  • Impermeable to water
  • Elastic, seamless, joint free
  • Unaffected by high ambient temperature
  • Resistant to aggressive soils and contaminated ground water
  • Low odour, dries without generating strong vapour
Product Data Sheet Show all documents

Usage

Sika® Igasol® Emulsion BA-10 is used for:
  • Tanking and waterproofing of substructures to provide an impervious membrane
  • Vapour barrier of cladded walls
  • Maintenance of many roof types including asphalt-felt roofs, concrete, cement, lightweight screeds, timber etc.
  • As an adhesive for bonding insulation boards, expanded polystyrene, cork tiles etc.
  • Damp proof membrane for roofs and floor slabs
  • Efficient curing membrane to freshly laid concrete
  • Basements, retaining walls
 

Advantages

Sika® Igasol® Emulsion BA-10 provides:
  • High rubber content - 10 %
  • Excellent adhesion to most building substrates
  • Reduced chloride penetration
  • Can be applied on damp substrates
  • Non sagging
  • Single component
  • Water based
  • Economical, easy to apply, reduces labour cost
  • Can be applied on vertical and horizontal areas
  • Impermeable to water
  • Elastic, seamless, joint free
  • Unaffected by high ambient temperature
  • Resistant to aggressive soils and contaminated ground water
  • Low odour, dries without generating strong vapour

Packaging

200 L drums

Colour

Dark brown (liquid)

Black (dry)

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Sika® Igasol® Emulsion BA-10 complies with concrete curing requirements of ASTM C309-93 and ASTM D2939, when applied at minimum 250 g/m2.
Product Information

Chemical Base

Blend of bitumen and rubber

Shelf Life

Minimum 12 months from production date when stored properly.

Storage Conditions

Store in in original, unopened and undamaged sealed containers in a cool, dry area under shade temperatures between +5 °C and +35 °C.

Density

~1.05 kg/l (+25 °C)

pH-Value

~11

Solid content by weight

~35 % (10 % rubber content)
Technical Information

Chemical Resistance

Groundwater, salt solutions, sea water, mild detergents, mild acids and alkalis. Contact Sika Technical Department for further information

Service Temperature

-10 °C min. / +85 °C max.

Application

Application Information

Ambient Air Temperature

+5 °C min. / +45 °C max.

Substrate Temperature

+5 °C min. / +55 °C max.

Drying Time

Touch dry after ~1 h (+35 °C)

Waiting Time / Overcoating

Minimum 4 h (+35 °C)

Applied Product Ready for Use

~3 days (+25 °C)
Consumption

Consumption

0.25 - 0.50 kg/m2 per coat, apply 2 - 3 coats

This figure is theoretical and does not include for any additional material required due to surface porosity, surface profile, variations in level and wastage etc.
Application steps

SUBSTRATE PREPARATION

All surfaces must be sound, even, free from dust, loose particles and any contamination. May be applied to damp but not waterlogged surfaces.
Hot and very dry, porous concrete surfaces must be primed by diluting Sika® Igasol® Emulsion BA-10 with clean water at 1 : 1 ratio (by weight).

When used as protective coating, all pinholes, cavities, cracks etc. in the substrate must be filled with a suitable Sika® repair mortar.

MIXING

Sika® Igasol® Emulsion BA-10 must be stirred well before use. Where a single drum is used for prolonged periods, occasional stirring during application is recommended.

CLEANING OF TOOLS

Clean all equipment and tools with water immediately after use. Dampen tools before and occasionally during use to avoid clogging and ease application.

Documents