Product Data Sheet Show all documents

SikaCeram®-600 Tile Grout PK

CEMENTITIOUS GROUT FOR TILES GAPS

SikaCeram®-600 Tile Grout PK is a one component, pre-packed tile grout combining cement with selected pigment and several admixtures. It fills the spaces between tiles, provides stability, and also aesthetic function.

  • Non-shrink and prevent cracks
  • Non-Sag / slump (thixotropic) application
  • Consistent colour quality
  • Easy to use and apply, just add water
Find a Store
Product Data Sheet Show all documents

Usage

For filling the spaces of homogeneous tile, ceramic tile, marble, granite, mosaic, and natural stone, over a range of applications as below:
  • Floor and wall
  • Interior and exterior
  • Dry and wet area
  • For dry area, mix SikaCeram®-600 Tile Grout PK with water.
 

Advantages

  • Non-shrink and prevent cracks
  • Non-Sag / slump (thixotropic) application
  • Consistent colour quality
  • Easy to use and apply, just add water

Packaging

1 kg Pouch

Colour

Powder / available in following colours

White, Burgundy, Grey, Seige Green, Ivory, Pink, Rust Brown, Blue, Black, Beige, Peach Brown, Dark Brown

Product Details

Product Information

Shelf Life

12 months from date of production if stored properly in original, unopened and undamaged sealed packaging

Storage Conditions

Store in dry conditions at temperatures between +5 °C and +35 °C.

Density

~1.9 kg/L

 

Application

Application Information

Ambient Air Temperature

15 °C to 40 °C

Mixing Ratio

Water:SikaCeram®-600 Tile Grout PK = 0.3 L:1 kg (by weight)
Water:SikaCeram®-600 Tile Grout PK = 1:2.5 (by volume)

Pot Life

~1 hour

Applied Product Ready for Use

FOOT TRAFFIC TIME
After 24 hours
Consumption

Consumption

Tile size (mm)

Joint Width (mm)

Consumption (kg/m )

200x200x6

1

0.48

3

1.44

300x300x6

1

0.36

3

1.08

400x400x6

1

0.24

3

0.72

600x600x10

1

0.2

3

0.6

Application steps

MIXING

  • For dry area : pour 0.3 litre of water into mixing ves-sel then add SikaCeram®-600 Tile Grout PK slowly and mix properly.  

  • For wet area : pour 0.3 litre of Sika Latex into mixing vessel then add SikaCeram®-600 Tile Grout PK slowly and mix properly.
  • Mixing time is ~3 minutes. A slow speed mixer is re-commended (300 – 600 rpm).

APPLICATION

  • Apply the grout to spaces between tiles diagonally using rubber trowel.
  • After the grout sets for ~10 minutes, wipe up the excess grout with damp sponge from the tile surfaces.
  • Run the sponge over the grout joints to get consistent, even-depth grout joints.
  • Waiting time before foot traffic minimum 24 hours.

Documents