Product Data Sheet Show all documents

Sikament®-510 PK

High Range Water Reducing and Set Retarding Concrete Admixture

Sikament®-510 PK is used as a highly effective water-reducing agent and supermenticizer to produce high quality, free flowing concrete in hot climates. The dual action of Sikament®-510 PK promotes accelerated hardening with high early and ultimate strengths. Suitable for use in tropical and hot climatic conditions.

 Sikament®-510 PK provides the following properties:
    As a Superplastiziser
    • Substantial improvement in workability without          increased water or the risk of segregation.
    • Long-lasting control of slump loss.
    • No adverse effect on ultimate strengths.
    As a Water Reducer
    • Early strengths significantly increased.
    • High ultimate strengths.
    • Up to 20% water reduction.
    • Especially suitable for hot climates.
    • No excessive air-entrainment.
    • No adverse shrinkage effects.
    • Improved surface finish.
    • Increased water tightness.
    Find a Store
    Product Data Sheet Show all documents

    Usage

    Sikament®-510 PK is used wherever high-quality concrete is demanded under difficult placing and climatic conditions.  

    Advantages

     Sikament®-510 PK provides the following properties:
      As a Superplastiziser
      • Substantial improvement in workability without          increased water or the risk of segregation.
      • Long-lasting control of slump loss.
      • No adverse effect on ultimate strengths.
      As a Water Reducer
      • Early strengths significantly increased.
      • High ultimate strengths.
      • Up to 20% water reduction.
      • Especially suitable for hot climates.
      • No excessive air-entrainment.
      • No adverse shrinkage effects.
      • Improved surface finish.
      • Increased water tightness.

      Packaging

      05 ltr jerry can

      20 ltr plastic can

      200 ltr drum

      1000 ltr IBC

      Bulk supply in tanker is possible on demand

      Colour

      Brown liquid

      Product Details

      Sustainability / Certifications / Approvals

      APPROVALS / STANDARDS

      Sikament®-510 PK complies with ASTM C-494 Type A, B, D and EN 934-2 :2001
      Product Information

      Chemical Base

      Organic polymer blend

      Shelf Life

      12 months minimum from production date if stored properly in original unopened packaging.

      Storage Conditions

      The product must be stored properly in undamaged, unopened original sealed packaging in dry conditions at temperatures between +5° C and
      +35° C. Protect from direct sunlight and frost.

      pH-Value

      ≥ 6

      Total Chloride Ion Content

      ≤ 0.2% (EN934-2)

      Specific gravity

      1.11 ± 0.03

      Application

      Application Information

      Compatibility

      Sikament®-510 PK may be combined with the following Sika products:

      • SikaPump
      • Sika FerroGard-901
      • SikaFume®-92 D PK

      It is also compatible with sulphate resistant cement. Pre-trials are

      recommended if combinations with the above products are being made.

      Please consult our Technical Services

      Dispensing

      Sikament®-510 PK can be added separately to the freshly mixed concrete or directly to the mixing water prior to its addition to the aggregates. When added separately to the freshly mixed concrete, further mixing should take place for at least one minute per cubic meter.
      Consumption

      Recommended Dosage

      0.8 - 3% by weight of cement. It is advisable to carry out trial mixes to

      establish the exact dosage rate required.
      Application steps

      CLEANING OF TOOLS

      Clean all equipment and tools with water immediately after use.

      Documents