Product Data Sheet Show all documents

Sikament® HRM PK

High Range Water Reducing And Slump Retaining Concrete Admixtur

Sikament® HRM PK is used as highly effective water-reducing agent and superplasticizer for the production of high quality, free flowing concrete in hot climate. The dual action Sikament® HRM PK promotes accelerated hardening with high early and ultimate strengths.
Suitable for use in tropical and hot climatic conditions

Sikament® HRM PK provides the following properties: As a Superplasticizer
  • Substantial improvement in workability without          increased water or the risk of segregation.
  • Long-lasting control of slump loss.
As a Water Reducer
  • Early strengths significantly increased
  • High ultimate strengths
  • Upto 20% water reduction
  • Especially suitable for hot climate
  • No excessive air-entrainment
  • No adverse shrinkage effects
  • Improved surface finish
  • Increased water tightness.
Find a Store
Product Data Sheet Show all documents

Usage

Sikament® HRM PK is used wherever high-quality concrete is demanded under difficult placing and climatic conditions.  

Advantages

Sikament® HRM PK provides the following properties: As a Superplasticizer
  • Substantial improvement in workability without          increased water or the risk of segregation.
  • Long-lasting control of slump loss.
As a Water Reducer
  • Early strengths significantly increased
  • High ultimate strengths
  • Upto 20% water reduction
  • Especially suitable for hot climate
  • No excessive air-entrainment
  • No adverse shrinkage effects
  • Improved surface finish
  • Increased water tightness.

Packaging

05 ltr jerry can

20 ltr plastic can

200 ltr drum

1000 ltr IBC

Bulk supply in tanker is possible on demand

Colour

Brown liquid

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

Following test results are based on ASTM C-494 Type G.
Product Information

Chemical Base

Organic polymer blend

Shelf Life

12 months minimum from production date if stored properly in original unopened packaging.

Storage Conditions

The product must be stored properly in undamaged, unopened original sealed packaging in dry conditions at temperatures between +5° C and
+35° C. Protect from direct sunlight and frost.

pH-Value

≥ 6

Total Chloride Ion Content

≤ 0.2% (EN934-2)

Specific gravity

1.2 ± 0.03

Application

Application Information

Compatibility

Sikament® HRM PK may be combined with the following Sika products:

  • Sika Pump
  • Sika FerroGard-901
  • SikaFume®-92 D PK

It is also compatible with sulphate resistant cement. Pre-trials are
recommended if combinations with the above products are being made.
Please consult our Technical Services Department.

Dispensing

Sikament® HRM PK can be added separately to the freshly mixed concrete or directly to the mixing water prior to its addition to the aggregates. When added separately to the freshly mixed concrete, further mixing should take place for at least one minute per cubic meter.
Consumption

Recommended Dosage

0.8 – 2.5 % by weight of cement. It is advisable to carry out trial mixes to establish the exact dosage rate required.
Application steps

CLEANING OF TOOLS

Clean all tools & application equipment with water immediately after use.

Documents