Product Data Sheet Show all documents

SikaEmaco® S 466 PK

PUMPABLE, FREE FLOWING, SHRINKAGE COMPENSATED MICRO-CONCRETE FOR GROUTING
AND REPAIR

SikaEmaco® S 466 PK is a cementitious, pre-bagged, free flowing, one component, non-shrink precision microconcrete with high early and ultimate strength. Suitable for use in hot and tropical climatic conditions.

SikaEmaco® S 466 PK is an easy to use precision microconcrete requiring only the addition of water. It offers the following beneficial properties:
▪ Easy to mix
▪ Very good flow characteristics
▪ Adjustable consistency
▪ Moderate heat of hydration
▪ Shrinkage compensated
▪ High final strength
▪ Non-flammable
▪ Vapour permeable
▪ Compatible with the properties of typical concrete
Find a Store
Product Data Sheet Show all documents

Usage

SikaEmaco® S 466 PK precision micro-concrete is used for repair and grouting in various applications such as:
  • Structural repair of deteriorated concrete
  • Columns in precast construction.
  • Casting sections or members where the volumes required are too large for conventional grouts, and too small and inaccessible for normal concreting applications.
  • Cavities, gaps and recesses.
  • Re-profiling of damaged concrete members and reprofiling of pile tops using formwork for both pouring and pumping techniques.  

Advantages

SikaEmaco® S 466 PK is an easy to use precision microconcrete requiring only the addition of water. It offers the following beneficial properties:
▪ Easy to mix
▪ Very good flow characteristics
▪ Adjustable consistency
▪ Moderate heat of hydration
▪ Shrinkage compensated
▪ High final strength
▪ Non-flammable
▪ Vapour permeable
▪ Compatible with the properties of typical concrete

Packaging

25 kg 

Colour

Grey powder

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

SikaEmaco® S 466 PK follows the main requirements for nonshrink hydraulic cement grout, according to ASTM C1107 and EN 1504
Product Information

Chemical Base

Portland cement, selected fillers and aggregates, special additives.

Shelf Life

6 months minimum from date of production

Storage Conditions

Store in original unopened packaging in a cool and dry condition between +5 °C and +35 °C. Protect from direct sunlight, heat and moisture.

Maximum Grain Size

≈ 4 to 5 mm

 
Technical Information

Compressive Strength

≥ 25 MPa 1 day
≥ 35 MPa 3 days
≥ 45 MPa 7 days
≥ 65 MPa 28 days
(ASTM 1107 / ASTM C109/70mm)

Application

Application Information

Mixing Ratio

0.14

Layer Thickness

Min. 25 mm per pour
Max. 150 mm per pour

Ambient Air Temperature

+5 °C min. / +35 °C max.

Substrate Temperature

+5 °C min. / +35 °C max.

Pot Life

≈ 20 min

Fresh mortar density

≈ 2.2 - 2.4 Kg/L
Consumption

Yield

≈ 12.5 L

Documents