Product Data Sheet Show all documents

SikaLatex® PK

Water Resistant Bonding Agent and Mortar Admixture

SikaLatex® PK is a synthetic acrylic dispersion that is used as admixture for cementitious bonding bridges and high quality site-mix mortars.

The main advantages of SikaLatex® PK are:
  • Increased adhesion
  • Reduced shrinkage and cracking
  • Increased abrasion resistance
  • Reduced permeability
  • Improved workability
  • User friendly
  • Suitable on most common construction substrates
Find a Store
Product Data Sheet Show all documents

Usage

SikaLatex® PK is used as bonding agent and site-mix mortar admixture for the following applications:
  • Grouts and screeds
  • Patch repair mortars
  • Mansonry mortars
  • Renders
  • Tile adhesives
 

Advantages

The main advantages of SikaLatex® PK are:
  • Increased adhesion
  • Reduced shrinkage and cracking
  • Increased abrasion resistance
  • Reduced permeability
  • Improved workability
  • User friendly
  • Suitable on most common construction substrates

Packaging

05 ltr jerry can

20 ltr plastic can

200 ltr drum

1000 ltr IBC

Bulk supply in tanker is possible on demand

Colour

White liquid

Product Details

Product Information

Chemical Base

Acrylic Dispersion

Shelf Life

12 months minimum from production date if stored properly in original unopened packaging.

Storage Conditions

The product must be stored properly in undamaged, unopened original sealed packaging in dry conditions at temperatures between +5° C and +35° C. Protect from direct sunlight and frost.

pH-Value

≥ 5

Specific gravity

1.00 ± 0.02

Application

Consumption

Recommended Dosage

Bonding bridge

SikaLatex® : Water = 1 : 1

Mortar

SikaLatex® : Water = 1 : 1 to 1 : 3
Application steps

MIXING

Mix SikaLatex® with the correct amount of water to produce a gauging solution.

Pour part of the gauging solution into a suitable mixing container. While stirring slowly, add the cementsand mix to the gauging solution and mix thoroughly until a smooth, uniform and lump-free mix is achieved. Within the mixing time add additional gauging solution to adjust to the desired consistency.

 

CLEANING OF TOOLS

Clean all equipment and tools with water immediately after use.

Documents