Product Data Sheet Show all documents

SikaBond® DV

Economical Water Resistant Bonding Agent And Mortar Admixture

SikaBond® DV is a synthetic rubber emulsion that is used as admixture for cementitious bonding bridges and high quality site-mix mortars.
Suitable for use in hot and tropical climatic conditions.

SikaBond® DV is simply added to the mixing water to improve the following properties:
  • adhesion
  • shrinkage
  • water resistance
  • abrasion resistance
  • chemical resistance
SikaBond® DV is non-corrosive, ready to use and does not re-emulsify, even under highly alkaline conditions.
Find a Store
Product Data Sheet Show all documents

Usage

SikaBond® DV is used as bonding agent and site-mix mortar admixture for the following applications:
  • Thin layer patching mortars
  • Renders
  • Floor screeds
  • Concrete repair mortars
  • Abrasion resistant linings
 
  • Tile fixing mortars
  • Masonry mortars
  • Bonding slurry for fresh to old concrete

Advantages

SikaBond® DV is simply added to the mixing water to improve the following properties:
  • adhesion
  • shrinkage
  • water resistance
  • abrasion resistance
  • chemical resistance
SikaBond® DV is non-corrosive, ready to use and does not re-emulsify, even under highly alkaline conditions.

Packaging

20 L pails and 200 L drums

Colour

White liquid

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

SikaBond® DV is certified according "Low Emitting Materials as per Al Sa'fat - Dubai Green Building Evaluation System" by Dubai Central Laboratory (DCL) certificate No. CL17020432
Product Information

Chemical Base

Styrene Butadiene Rubber

Shelf Life

12 months minimum from production date

Storage Conditions

Store in a dry area in original packaging and at temperatures between +5 °C and +35 °C. Protect from direct sunlight, heat and moisture.

Density

~1.00 kg/l (+25 °C)

Total Chloride Ion Content

Nil(EN 934-2)

Application

Application steps

MIXING

BONDING SLURRY
SikaBond® DV : Water = 1 : 1
Mix together with fresh cement and fine sand to a homogeneous brushable slurry consistency. The resulting bonding slurry should be brushed well onto the prepared surface.

MORTARS AND RENDERS

Mixing can be done in any suitable concrete mixer, such as a pan mixer. First add the cement and aggregate into the mixer and mix to a uniform consistency. Then add the required quantity of diluted SikaBond® DV and mix slowly for at least 2 minutes. Apply by steel trowel and finish with a wooden float.

Documents