Product Data Sheet Show all documents

Sika® Separol® FP-15

Oil based, anti-corrosive shutter release agent

Sika® Separol® FP-15 is an oil based shutter / mould release agent that when applied to formwork provides for clean, fast and easy striking.
Suitable for use in hot and tropical climatic conditions.

  • Allows clean, easy striking
  • Extends the life of formwork
  • Improved finish for fair faced concrete
  • Reduces concrete contamination
  • Economical to use
  • Reduces blow hole formation
Find a Store
Product Data Sheet Show all documents

Usage

  • Steel shuttering
  • Plywood shutters
  • High density plastic shutters
 

Advantages

  • Allows clean, easy striking
  • Extends the life of formwork
  • Improved finish for fair faced concrete
  • Reduces concrete contamination
  • Economical to use
  • Reduces blow hole formation

Packaging

20 L and 200 L drums

Colour

Light yellowish brown liquid

Product Details

Product Information

Chemical Base

Blend of oil based products

Shelf Life

24 months from date of production if stored properly

Storage Conditions

Store in undamaged, unopened, original sealed packaging in dry conditions at temperatures between +5 °C and +45 °C.

Protect from direct heat and sunlight.

Density

~0.83 kg/l 25 °C)

Application

Consumption

Consumption

Timber:

~25 m2/kg

Steel or plastic:~50 m2/kg

Coverage depends on wind, humidity and temperature.

 
Application steps

APPLICATION INSTRUCTIONS

Sika® Separol® FP-15 is supplied ready to use.

Shutter surfaces must be clean and free from moisture, dirt and laitance.

Apply in one even coat by brush, roller or spray.

Documents