SikaPlast®-1350

SikaPlast-1350 is a third generation super-plasticizer for concrete and mortar. It is particularly developed for the production of high flow concrete with extended slump retention in hot climates. SikaPlast-1350 is especially suitable for use in concrete mixes containing micro-silica and other pozzolanic materials like GGBS & Fly Ash.

  • Substantial improvement in workability without increased water
  • No risk of segregation
  • Normal set without retardation (within the dosage limit)
Find a Store

Usage

SikaPlast-1350 facilitates extreme water reduction, excellent flowability with optimum cohesion and impressive slump retention characteristics.

SikaPlast-1350 is used for the following types of concrete:

  • High flow concrete
  • Concrete with high water reduction
  • High strength concrete

Advantages

SikaPlast-1350 acts by surface absorption on the cement particles producing a sterical hindrance as well as electrostatic repulsion between cement particles, which results in higher dispersion, flow and retention.

SikaPlast-1350 provides the following beneficial properties :

  • Substantial improvement in workability without increased water
  • No risk of segregation
  • Normal set without retardation ( within the dosage limit )
  • Improved density and surface finish
  • Improved water tightness
  • Does not contain Chlorides or other steel corrosion promoting ingredients, therefore it may be used for reinforced and pre-stressed concrete construction.

Packaging

1000 litre flow bins/ IBC

Colour

Light brownish