Product Data Sheet Show all documents

Sika MaxTack®

High initial tack 1-component, solvent-free adhesive.

Sika MaxTack® is a 1-component, solvent-free high tack adhesive with high initial tack.

  • High initial tack
  • Fixing without tapes, nails or screws
  • Good adhesion on many substrates
  • Good workability
  • Water-based
  • Over-paintable by an emulsion waterborne paint
  • For interior use on wall and ceiling
  • For sheltered outdoor use on wall (canopy, balcony)
Find a Store
Product Data Sheet Show all documents

Usage

Sika MaxTack® is designed for the indoor and sheltered outdoor bonding of building materials such as skirting boards, wood frames, panels, terracotta tiles, anodised aluminum, hard PVC profiles, polystyrene mouldings and panels, polystyrene ceiling tiles and wood mouldings.
Sika MaxTack® adheres well to various porous materials such as concrete, mortar, fiber cement, wood and the painted substrates of decorative pieces.  

Advantages

  • High initial tack
  • Fixing without tapes, nails or screws
  • Good adhesion on many substrates
  • Good workability
  • Water-based
  • Over-paintable by an emulsion waterborne paint
  • For interior use on wall and ceiling
  • For sheltered outdoor use on wall (canopy, balcony)

Packaging

280 ml cartridge, 12 cartridges per box

100 g foil pack, 24 foil packs per box

280 g pressurized can, 12 mini pressurized cans per box

Colour

Off-white

Product Details

Product Information

Chemical Base

1-Component water-based dispersion

Shelf Life

Sika MaxTack® has a shelf life of 18 months from the date of production, if it is stored properly in undamaged, original, sealed packaging, and if the storage conditions are met.

Storage Conditions

Sika MaxTack® shall be stored in dry conditions, protected from direct sunlight and at temperatures between +5 °C and +25 °C.

Density

1.40 kg/l approx.

(ISO 1183-1)
Technical Information

Shore A Hardness

85 approx. (after 28 days)

(ISO 868)

Shear Strength

3.0 N/mm2 approx., 1mm adhesive thickness

(EN 1465)

Service Temperature

−15 °C to +60 °C

Application

Application Information

Sagging

Very low

(ISO 7930)

Ambient Air Temperature

+5 °C to +35 °C, min. 3 °C above dew point temperature

Substrate Temperature

+5 °C to +35 °C

Curing Rate

6 mm/24 hours approx. (23 °C / 50% r.h.)

(CQP 049-2)

Skin Time

30 minutes approx. (23 °C / 50% r.h.)

(CQP 019-1)
Consumption

Consumption

Using a nozzle with a 5 mm diameter, bead yield is approx. 14 m in length per 280 ml cartridge (approx. 20 ml per linear meter).
Application steps

APPLICATION INSTRUCTIONS

For the application of Sika MaxTack® all standard construction guidelines apply.

SUBSTRATE PREPARATION

The substrate must be clean, dry, sound and homogeneous, free from oils, grease, dust and loose or friable particles. Paint, cement laitance and other poorly adhering contaminants must be removed. Sika MaxTack® adheres without primers and/or activators.
 

Non-porous substrates
Aluminium, anodised aluminium, stainless steel, PVC, galvanised steel, powder coated metals or glazed tiles have to be cleaned and pre-treated using Sika® Aktivator-205, wiped on with a clean towel. Before sealing, allow a flash-off time of > 15 minutes (< 6 hours).
Other metals, such as copper, brass and titanium-zinc, also have to be cleaned and pre-treated using Sika® Aktivator-205,wiped on with a clean towel. After the necessary flash-off time, use a brush to apply Sika® Primer-3 N and allow a further flash-off time of > 30 minutes (< 8 hours) before sealing the joints.
 

Porous substrates

Wood has to be sanded, concrete and mortar have to be scrubbed and sanded to remove laitance.

Clean with an industrial vacuum.

For more detailed advice and instructions please contact our Technical Service Department.

CLEANING OF TOOLS

Clean all tools and application equipment immediately after use with water. Once cured, residual material can only be removed mechanically.

 

Documents