Product Data Sheet Show all documents

Sikadur®-52 Injection LP

Sikadur-52 is a low viscosity, free flowing and fast curing injection resin and primer/coating based on a 2 component solvent free epoxy resin; ideally suited to a wide range of building and civil engineering applications where highly penetrative material is required. It is available in two grades, Normal and Long Potlife for moderate and high ambient temperatures respectively.

  • Shrink free
  • Insensitive to moisture during application, cure or whilst in service
  • Applicable over wide temperature range
  • Low viscosity
  • Excellent adhesion to most building materials even when damp
  • Proven in service
  • High tensile and flexural strength
  • Supplied in factory proportioned units
  • High early strength
  • Chemical resistant
    Find a Store
    Product Data Sheet Show all documents

    Usage

    Sikadur-52 may be used to inject and fill cracks between 0.2 - 5 mm wide in a wide variety of constructions applications. Sikadur-52 does not shrink on curing and forms a rigid, high strength product which exhibits excellent adhesion to most construction materials enabling the restoration of structural adequacy to columns, beams, foundations, decks and water retaining structures.

    Advantages

    • Shrink free
    • Insensitive to moisture during application, cure or whilst in service
    • Applicable over wide temperature range
    • Low viscosity
    • Excellent adhesion to most building materials even when damp
    • Proven in service
    • High tensile and flexural strength
    • Supplied in factory proportioned units
    • High early strength
    • Chemical resistant

      Packaging

      450 ml twin cartridge

      3.0 kg and 8.0 kg net pre-proportioned kits

      Colour

      Part A – Semi-Transparent (pale yellow), Part B – Transparent (pale brown) Mixed product pale straw colouration

      Documents