Product Data Sheet Show all documents

Sika AnchorFix®-2

Anchoring adhesive for medium to high loads

Solvent and styrene free, epoxy acrylate based, 2-component anchoring adhesive.

  • Fast curing
  • Standard guns can be used
  • High load capacity
  • ETA to ETAG 001 for anchoring in concrete
  • ETA to ETAG 001 for rebar connections
  • ER to AC308 by IAPMO UES, anchoring in concrete for static, wind and earthquake loading
  • Drinking Water certified
  • Non-sag, even overhead
  • Styrene-free
  • Low odour
  • Low wastage
  • No transportation restrictions
 
Find a Store
Product Data Sheet Show all documents

Usage

As a fast curing anchoring adhesive for all grades of:
  • Rebars / reinforcing steel
  • Threaded rods
  • Bolts and special fastening systems
In the following substrates:
  • Concrete
  • Solid masonry
  • Steel
  • Hard natural stone*
  • Solid rock*
*   These substrates may vary greatly, in particular with regard to strength, composition and porosity. Therefore, for each application the suitability of Sika AnchorFix®-2 Adhesive must be tested by first applying the Product only to a sample area. Check in particular bond strength, surface staining and discoloration.

Advantages

  • Fast curing
  • Standard guns can be used
  • High load capacity
  • ETA to ETAG 001 for anchoring in concrete
  • ETA to ETAG 001 for rebar connections
  • ER to AC308 by IAPMO UES, anchoring in concrete for static, wind and earthquake loading
  • Drinking Water certified
  • Non-sag, even overhead
  • Styrene-free
  • Low odour
  • Low wastage
  • No transportation restrictions
 

Packaging

300 ml standard cartridge

12 cartridges per box

pallet: 75 boxes

550 ml standard cartridge

12 cartridges per box

pallet: 50 boxes

Colour

Component Alight green
Component Bblack
Component A+B mixedlight grey

Product Details

Sustainability / Certifications / Approvals

APPROVALS / STANDARDS

  • Bonded injection type anchor according to ETAG 001 Part 1 and 5 Option 7, ETA-13/0968, Declaration of Performance 020403010020000001 5034408, certified by notified product certification body 1020, certificate of constancy of performance 1020-CPD-090-030091, and provided with the CE marking.
  • Post installed rebar connection according to ETAG 001 Part 1 and 5 TR 023, ETA-15/0056, Declaration of Performance 020205010020000001 5034408, certified by notified product certification body 1020, certificate of constancy of performance 1020-CPR-090-033215, and provided with the CE marking
  • Post-installed adhesive anchor in concrete elements according to ICC-ES Acceptance Criteria AC308, IAPMO UES Evaluation Report ER-0327

  • Fire resistance according to DIN EN 1363-1 (ISO 834), University of Brunswick, Report No. 3551/4926

  • Fire resistance of Sika AnchorFix-2 injection systems in conjunction with concrete reinforcing bar and subjected to fire exposure, Centre Scientifique et Technique du Bâtiment (CSTB), REPORT No 26024178e
  • Drinking Water Approval: Drinking Water System Components NSF/ANSI 61, Underwriters Laboratories (UL), MH49487

 
Product Information

Shelf Life

15 months from date of production

All Sika AnchorFix®-2 cartridges have the expiry date printed on the label.

Storage Conditions

Stored properly in original, unopened, sealed and undamaged packaging in dry conditions at temperatures between +5 °C and +25 °C. Protect from direct sunlight.

Density

Component A

~1.62–1.70 kg/l

Component B

~1.44–1.50 kg/l

Component A+B mixed

~1.60–1.68 kg/l
Technical Information

Compressive Strength

~68 N/mm2 (7 days, +20 °C)

(ASTM D 695)

Modulus of Elasticity in Compression

~3 700 N/mm2 (7 days, +20 °C)

(ASTM D 695)

Tensile Strength in Flexure

~24 N/mm2 (7 days, +20 °C)

(ASTM D 790)

Tensile Strength

~13 N/mm2 (7 days, +20 °C)

(ASTM D 638)

Service Temperature

long term

-40° C min. / +50 °C max.

short term (1–2 hours)

+80 °C

Application

Application Information

Mixing Ratio

Component A : component B = 10 : 1 by volume

Layer Thickness

~5 mm max.

Sag Flow

Non-sag, even overhead

Product Temperature

Sika AnchorFix®-2 must be at a temperature of between +5 °C and +20 °C for application.

Ambient Air Temperature

-5 °C min. / +35 °C max.

Dew Point

Beware of condensation.
Substrate temperature during application must be at least 3 °C above dew point.

Substrate Temperature

–5 °C min. / +35 °C max.

Curing Time

Temperature

Open time - Tgel

Curing time - Tcur

+20 °C – +35 °C

1 minute

40 minutes

+10 °C – +20 °C

4 minutes

70 minutes

+5 °C – +10 °C8 minutes100 minutes
0 °C – +5 °C—*180 minutes
–5 °C – 0 °C—*24 hours

*   Minimum cartridge temperature: +5 °C
Application steps

SUBSTRATE QUALITY

Mortar and concrete must be older than 28 days. Substrate strength (concrete, masonry, natural stone) must be verified. Pull-out tests must be carried out if the substrate strength is unknown. The anchor hole must always be clean, dry, free from oil and grease etc. Loose particles must be removed from the holes.
Threaded rods and rebars have to be cleaned thoroughly from any oil, grease or any other substances and particles such as dirt etc.

MIXING

Getting the cartridge ready: 300 ml / 550 ml

02-en-AnchorFix-1_deck4-24

1. Unscrew the cap

02-en-AnchorFix-2b_deck4-24

2. Cut the film

02-en-AnchorFix-3_deck4-24

3. Screw on the static mixer

02-en-AnchorFix-Double_7_deck4-24

4. Place the cartridge into the gun and start application

When the work is interrupted the static mixer can remain on the cartridge after the gun pressure has been relieved. If the resin has hardened in the nozzle when work is resumed, a new nozzle must be attached.

CLEANING OF TOOLS

Clean all tools and application equipment with Sika® Colma Cleaner immediately after use. Hardened / cured material can only be mechanically removed.

Documents